Press Releases
Demo Room

 

 

 

 

 

Precision Laser Scan Micrometers- LDM Series accurately measures inside/ outside diameters, gap and pitch, width and edge, thickness, position and movement. Available in fixed and separate throat designs, single and dual axis configurations.

Surface Variation, Defect & Flaw detection- TM Series Surface Variation Detectors were designed to provide users with the reliable continuous high speed method to detect flaws in optical fibers, enamel, electric and vinyl wires, communication and power cables, metal & glass rods, pipes and hoses. Defect characterization, measurement, positional location and SPC analysis can be accomplished with the TM-DSS Processing System.

Elastic String Defect Marking System- The EMAC Series is a non-destructive in-process Elastic Marking Device that conveniently snaps an elastic string onto wire, cable, hose etc. to mark specific points of concern. Works with Defect Detectors, laser Micrometers, Capacitance Gauges, Spark Testers and any other device that provide a contact closure.

The LDM-700 Series can be used to measure true roundness or deformed/irregular shaped in-process material. Product Material Diameters from 0.003" to 7.0" can be measured with accuracy's from +/- 0.00006".
Home | About Us | Literature | Conversion Chart | What's Your Application?
 

D.A.S. Distribution, Inc.
66E Floydville Road | East Granby, CT 06026
Phone: (888) 344-0111 | Fax: (860) 844-3063
Email: tsales@dasdistribution.com

Copyrightę 2015 D.A.S Distribution, Inc.